|
|
 |
Sicoma |
MIX DESIGN PACKAGE
Your mix design lab is capable of creating huge savings for the company; we guarantee a saving of at least 10% of your cement cost and you may end up saving double this. Even a single ready-mix plant with average of 75 yd per hour, single shift, can give a 20 times return on investment in one year and repay the initial cost within one month. Here's how it works:
FIRST, MAKE BETTER MIX DESIGNS
Redilink Mix Design and Quality Control software takes all your material
data, your latest aggregate gradation tests, the environmental conditions and
the desired concrete characteristics, and creates the mix design that meets your
strength specifications with the least amount of cement. While doing this,
you have full control and can override the automatic formulation in specific
areas if you wish. The system recalculates literally thousands of
times to find the best combination possible; something that is impossible
in a manual mix design. The result is a mix design that is optimized far
better than ever possible before, and you can repeat it every day if you wish,
to take advantage of changes in aggregate characteristics. Savings of 10%
in cement are typical and you can save even more if you use the aggregate
costing feature to find the lowest cost combination.
Full
details
View RediLink MD QC slide show
THEN VERIFY THEM REALISTICALLY
If you are using a drum mixer to test your mix designs, along with a dry
plant/transit mixing, this is a good combination because the mixing action of
your test mixer is matched to your trucks. If you have a premix or central
mix plant with a twin shaft, high speed turbine or planetary mixer,
however, you are missing out big time. It's a well known fact that these
"compulsory action" mixers can save on cement by their superior mixing action.
Because you use a poor quality mixer for the mix design testing, however, your
test cylinders are understrength compared with your production concrete,
indicating that you need more cement than you really do. If a top quality
compulsory mixer is used, the comparison is valid and your break tests will
confirm that you can cut on cement usage. Here you can save another 10 to
20 percent.
The MP75 LAB is a production quality mixer, with characteristics identical to full sized models, that has been adapted for laboratory use. Full details
SPECIAL OFFER
For the first five customers for the MIX DESIGN PACKAGE (MP75 LAB and RediLink MDQC software), we are offering the software for half price. Contact us before they are all sold - use the contact form below.
